oki c301 error codes,oki c301 hata kodları

0.0 - 0 Yorum var.

Ürün Kodu : OKİ301ERROR
Marka : OKI

oki c301 hata codes,oki c301 error codes

Web sitemizde kullanilan tüm ticari Marka, Model, Logo, Amblem ve Telif Haklari; ilgili firmanin mülkiyeti kapsamindadir. Sadece ürün tanimlamasi, ürün uyumlulugu ve tespit amaçli kullanilmistir.

Stok Sor!

Fiyat Sorunuz

-	CRC CHECK NG	PU download data CRC check error A CRC check error was detected after downloading of PU data (PU firmware and custom media data).
-	WDT ERROR ADR=XXXX	PU firmware runaway
-	COMMUNICATION ERROR	PU-CU interface error
002, 006, 009, 011	POWER OFF/ON 002:ERROR 006:ERROR 009:ERROR 011:ERROR	CPU Exception
020	SERVICE CALL 020:ERROR	CU ROM Hash Check Error
024, 025	SERVICE CALL 024:ERROR 025:ERROR	Kanji Font Error
030	SERVICE CALL 030:ERROR	CU RAM Check Error
031, 036	SERVICE CALL 031:ERROR 036:ERROR	CU optional RAM check error
040	SERVICE CALL 040:ERROR	CU EEPROM error
041	SERVICE CALL 041:ERROR	CU flash memory error or CU board flash ROM error
042, 043, 045	SERVICE CALL 042:ERROR 043:ERROR 045:ERROR	Flash memory file system error
052	POWER OFF/ON 052:ERROR	Image processor driver error
067, 068	SERVICE CALL 067:ERROR 068:ERROR	Interface monitor error
070	POWER OFF/ON 070:ERROR	PostScript error
072	POWER OFF/ON 072:ERROR xx	Engine interface error or PU-CU interface error
073	POWER OFF/ON 073:ERROR	Video error. An error was detected in expanding image data (an invalid data was received)
074, 075	POWER OFF/ON 074:ERROR xxxx 075:ERROR xxxx	Video error. An error was detected in expanding image data.
081	SERVICE CALL 081:ERROR	Parameter matching check error Reading from or writing into EEPROM or flash memory cannot be made properly.
104	SERVICE CALL 104:ERROR	An engine EEPROM read/write error was detected.
106	SERVICE CALL 106:ERROR	Engine control logic error
112	SERVICE CALL 112:ERROR	The 2nd tray for a model different from the printer was detected.
121	SERVICE CALL 121:ERROR	High-voltage power supply interface error
122	SERVICE CALL 122:ERROR	Rear-fan error
123	SERVICE CALL 123:ERROR	Ambient humidity error or non connection of humidity sensor
124	SERVICE CALL 124:ERROR	Ambient temperature error
128-05	SERVICE CALL 128:ERROR-05	Image drum fan error
128-08	SERVICE CALL 128:ERROR-08	Front fan error
131, 134	SERVICE CALL 131:ERROR 134:ERROR	LED head detection error (131=Y, 132=M, 133=C, 134=K)
142	SERVICE CALL 142:ERROR	Image drum up-down movement position detection error
153	SERVICE CALL 153:ERROR	Image drum unit fuse-cut error

154	SERVICE CALL 154:ERROR	Belt unit fusecut error
155	SERVICE CALL 155:ERROR	Fuser unit fuse-cut error
160, 163	SERVICE CALL 160:ERROR 163:ERROR	Toner sensor detection error (160=Y, 161=M, 162=C, 163=K). This error does not occur with the printer in the factory shipped configuration.
167	SERVICE CALL 167:ERROR	Thermistor slope error
168	SERVICE CALL 168:ERROR (Note)	Compensation thermistor error
170, 171	SERVICE CALL 170:ERROR 171:ERROR (Note)	A fuser thermistor short or open circuit was detected.
172	SERVICE CALL 172:ERROR 173:ERROR	A fuser thermistor temperature error (high or low temperature) was detected.
174	SERVICE CALL 174:ERROR	A backup thermistor shot circuit was detected (high temperature)
175	SERVICE CALL 175:ERROR (Note)	A backup thermistor open circuit was detected (low temperature)
176, 177	SERVICE CALL 176:ERROR 177:ERROR	A backup thermistor temperature error (high or low temperature) was detected.
182	SERVICE CALL 182:ERROR	Option unit interface error
190	POWER OFF/ON 190:ERROR	System memory overflow
200, 202	SERVICE CALL 200:ERROR 202:ERROR	PU firmware download error
203, 204, 207, 208, 213, 214	POWER OFF/ON 203:ERROR 204:ERROR 207:ERROR 208:ERROR 213:ERROR 214:ERROR F0C:ERROR FFE:ERROR FFF:ERROR	CU program error (203 to 214 do not occur in general use of the printer) Invalid processing was performed with a CU program.
209	POWER OFF/ON 209:DOWNLOAD ERROR	Custom Media Type table downloading failure Custom Media Type table downloading failed.

231	SERVICE CALL 231:ERROR	TAG interface error A TAG interface error was detected. 01: A short-circuit error. 02: TAG communication error.
250	POWER OFF/ON 250:ERROR	SD card error
251	SERVICE CALL 251:ERROR	SD card erasure error
252, 255	POWER OFF/ON 252:ERROR 255:ERROR	SD card security error
256, 257	POWER OFF/ON 256:ERROR 257:ERROR	SD card error
901, 904	POWER OFF/ON 901:ERROR 904:ERROR (Note)	Belt temperature error 901: Short circuit 902: Open circuit 903: High temperature 904: Low temperature
923	POWER OFF/ON 923:ERROR	A lock error with black image drum
928	SERVICE CALL 928:ERROR	Fuser motor lock error
933	SERVICE CALL 933:ERROR	A clock error correction error with an option unit (which does not occur with the printer in the factory shipped configuration)
933	POWER OFF/ON 933:ERROR	Tray-2 CPU clock frequency error
980	SERVICE CALL 980:ERROR	Duplicate toner cartridge detection error Multiple toner cartridges for the same color ware detected.
983	SERVICE CALL 983:ERROR	Duplicate toner cartridge detection error Multiple toner cartridges for the same color ware detected.
990	SERVICE CALL 990:ERROR	Waste toner sensor detection error

* Yorum eklemek için Üye Girişi yapınız.