|
002 ... 005
|
Power OFF/ON
002 : Error - 005 : Error
|
CPU Exception
|
|
024
|
Inspection is required.
024 : Error
|
Kanji Font Error
|
|
030
|
Inspection is required.
030 : Error
|
CU RAM Check Error
|
|
040
|
Inspection is required.
040 : Error
|
CU EEPROM error
|
|
042, 043, 045
|
Inspection is required.
042 : Error
043 : Error.
045 : Error
|
Flash memory file system error
Accessing the flash ROM directly mounted on the CU/ PU board failed.
|
|
049
|
Inspection is required.
049 : Error
|
CU Engine Type Mismatch
Resolution of a LED head as opposed to a unit model is mismatch.
|
|
054
|
Power OFF/ON
054 : Error
|
A communication error of the scanner unit
A communication error was detected between the Controller and scanner unit.
|
|
057
|
Power OFF/ON
057 : Error
|
The timeout of command communication of the scanner
The timeout of command communication was detected between the Controller and scanner unit (A sub code indicates a cause). 01: There is no ACK for a command to start scanning. 02: There is no ACK for a command to cancel scanning. 03: There is no ACK for a command to cancel SU.
|
|
058
|
Power OFF/ON
058 : Error
|
An error of the scanner controlling area
An internal error was detected in the scanner controlling area ofthe Controller.
|
|
062
|
Power OFF/ON
062 : Error
|
USB Driver Error
|
|
064
|
Inspection is required.
064 : Error
|
SD Card Missing Error
|
|
069
|
Inspection is required.
069 : Error
|
NIC Chip Error
|
|
070
|
Power OFF/ON
070 : Error
|
PostScript error
Error is deteced inside the postscript core
|
|
072
|
Power OFF/ON
072 : Error
|
Engine interface error or PU-CU interface error
|
|
073
|
Power OFF/ON
073 : Error
|
Video error. An error was detected in expanding image data (an invalid data was received)
|
|
075
|
Power OFF/ON
075 : Error
|
Video error. An error was detected in expanding image data.
Is the CU/PU installed properly?
|
|
080
|
Power OFF/ON
080 : Error
|
Parameter I/O Error
An access error occurred in a storage point of a parameter by file damage.
|
|
081
|
Inspection is required.
081 : Error
|
Parameter matching check error
Reading from or writing into EEPROM or flash memory cannot be made properly.
|
|
085
|
Inspection is required.
085 : Error
|
SD Card ECC Error
An ECC error was detected by read processing of a SD memory card.
|
|
104
|
Inspection is required.
104 : Error
|
An engine EEPROM read/write error was detected.
|
|
106
|
Inspection is required.
106 : Error
|
Engine control logic error
|
|
112
|
Inspection is required.
112 : Error
|
The 2nd tray for a model different from the MFP was detected.
|
|
121
|
Inspection is required.
121 : Error
|
High-voltage power supply interface error
|
|
122
|
Inspection is required.
122 : Error
|
Rear-fan error
|
|
123
|
Inspection is required.
123 : Error
|
Ambient humidity error or non connection of humidity sensor
|
|
124
|
Inspection is required.
124 : Error
|
Ambient temperature error
|
|
127
|
Inspection is required.
127 : Error
|
An error of exhaust fan of the Fuser
|
|
128
|
Inspection is required. 128 : Error 05
|
Image drum fan error
|
|
134
|
Inspection is required.
134 : Error
|
LED head detection error (134=K)
|
|
153
|
Inspection is required.
153 : Error
|
Image drum unit fuse-cut error
|
|
163
|
Inspection is required.
163 : Error
|
Toner sensor detection error (163=K). This error does not occur with the MFP in the factory shipped configuration.
|
|
167
|
Inspection is required.
167 : Error
|
Thermistor slope error
|
|
170, 171
|
Inspection is required.
170 : Error
171 : Error
|
A fuser thermistor short or open circuit was detected.
|
|
172, 173
|
Inspection is required.
172 : Error
173 : Error
|
A fuser thermistor temperature error (high or low temperature) was detected.
|
|
182
|
Inspection is required.
182 : Error
|
Option unit I/F error
|
|
190
|
Power OFF/ON
190 : Error
|
System memory overflow
|
|
200, 201, 202
|
Inspection is required.
200 : Error
202 : Error
|
PU firmware download error
An error occurred in rewriting the PU firmware.
|
|
203, 204, 207, 208, 213, F0C, FFE, FFF
|
Power OFF/ON
203 : Error
204 : Error
207 : Error
208 : Error
213 : Error
F0C : Error
FFE : Error
FFF : Error
|
CU program error (203 to 213 do not occur in general use of the MFP)
Invalid processing was performed with a CU program.
|
|
209
|
Power OFF/ON
209 : Download error
|
Custom Media Type table downloading failure
Custom Media Type table downloading failed.
|
|
231
|
Inspection is required.
231 : Error
|
TAG interface error
IA TAG interface error was detected. 01 : A short-circuit error. 02 : TAG communication error.
|
|
250
|
Power OFF/ON
250 : Error
|
SD card error
|
|
251
|
Inspection is required.
251 : Error
|
SD card erasure error
|
|
802, 803, 805, 807, 808
|
PRESS POWER SW FOR 5SEC
Error : 802
Error : 803
Error : 805
Error : 807
Error : 808
|
SU Exception
|
|
811, 812, 813
|
PRESS POWER SW FOR 5SEC
Error : 811
Error : 812
Error : 813
|
SU Communication Error
Communication error between the Controller and the Scanner Unit is detected.
|
|
814
|
PRESS POWER SW FOR 5SEC
Error : 814
|
SU FW Removed
It is an error to notify that SU FW was erased by special key operation from a panel.
|
|
163
|
Inspection is required.
163 : Error
|
Toner sensor detection error (163=K). This error does not occur with the MFP in the factory shipped configuration.
|
|
167
|
Inspection is required.
167 : Error
|
Thermistor slope error
|
|
170, 171
|
Inspection is required.
170 : Error
171 : Error
|
A fuser thermistor short or open circuit was detected.
|
|
172, 173
|
Inspection is required.
172 : Error
173 : Error
|
A fuser thermistor temperature error (high or low temperature) was detected.
|
|
182
|
Inspection is required.
182 : Error
|
Option unit I/F error
|
|
190
|
Power OFF/ON
190 : Error
|
System memory overflow
|
|
200, 201, 202
|
Inspection is required.
200 : Error
202 : Error
|
PU firmware download error
An error occurred in rewriting the PU firmware.
|
|
203, 204, 207, 208, 213, F0C, FFE, FFF
|
Power OFF/ON
203 : Error
204 : Error
207 : Error
208 : Error
213 : Error
F0C : Error
FFE : Error
FFF : Error
|
CU program error (203 to 213 do not occur in general use of the MFP)
Invalid processing was performed with a CU program.
|
|
209
|
Power OFF/ON
209 : Download error
|
Custom Media Type table downloading failure
Custom Media Type table downloading failed.
|
|
231
|
Inspection is required.
231 : Error
|
TAG interface error
IA TAG interface error was detected. 01 : A short-circuit error. 02 : TAG communication error.
|
|
250
|
Power OFF/ON
250 : Error
|
SD card error
|
|
251
|
Inspection is required.
251 : Error
|
SD card erasure error
|
|
802, 803, 805, 807, 808
|
PRESS POWER SW FOR 5SEC
Error : 802
Error : 803
Error : 805
Error : 807
Error : 808
|
SU Exception
|
|
811, 812, 813
|
PRESS POWER SW FOR 5SEC
Error : 811
Error : 812
Error : 813
|
SU Communication Error
Communication error between the Controller and the Scanner Unit is detected.
|
|
814
|
PRESS POWER SW FOR 5SEC
Error : 814
|
SU FW Removed
It is an error to notify that SU FW was erased by special key operation from a panel.
|